Lactic Dehydrogenase (LDH): What the Number Can't Tell You
Lactic dehydrogenase (LDH), also called lactate dehydrogenase, is an enzyme found in almost every cell that converts pyruvate to lactate and back, and an LDH blood test measures how much of that enzyme's activity has reached the serum. A raised result shows that cells somewhere have released their contents, but it does not show which tissue, why, or how serious the cause is. LDH is also not blood lactate, so it cannot replace a lactate step test or tell you anything about LT1 and LT2.
Lactic dehydrogenase (LDH), also called lactate dehydrogenase, is an enzyme found in almost every cell that converts pyruvate to lactate and back, and an LDH blood test measures how much of that enzyme's activity has reached the serum. A raised result shows that cells somewhere have released their contents, but it does not show which tissue, why, or how serious the cause is. LDH is also not blood lactate, so it cannot replace a lactate step test or tell you anything about LT1 and LT2.
What lactic dehydrogenase (LDH) does inside the cell
LDH catalyses the last step of anaerobic glycolysis. In that step, pyruvate becomes lactate, and the reaction also runs in reverse. A 2022 review by GS Gupta describes LDH as the terminating enzyme of that pathway, with lactate made from glucose as the end product.
The enzyme is meant to stay inside cells. Normally only a small amount can be measured in blood. When cell membranes are damaged, more of it escapes. That is why labs use serum LDH as a general marker of cell turnover or damage and not as a test for any one organ.
LDH exists in several forms called isoenzymes. These are versions of the same enzyme that occur in different proportions in different tissues. A standard LDH test reports total activity. A separate isoenzyme panel splits that total into its fractions. Whether the panel is useful is for the ordering clinician to decide.
LDH vs blood lactate: two measurements that people mix up
The names overlap, so many endurance athletes assume that a high LDH result says something about their lactate threshold. It does not. The two measurements differ in almost every way:
| Serum LDH | Blood lactate (step test) | |
|---|---|---|
| What is measured | Enzyme activity | Concentration of a metabolite |
| Unit | U/L (enzyme units per litre) | mmol/L |
| Typical sample | Venous blood draw, sent to a lab | Fingertip or earlobe capillary drop, read on a meter |
| Changes over | Hours to days | Seconds to minutes during exercise |
| Who interprets it | Ordering clinician | Athlete or coach, for training intensity |
| Gives LT1/LT2? | No | Yes, when you take it across graded stages |
U/L means international units of enzyme activity per litre of serum. It measures how much substrate the enzyme can convert in a given time, not a mass or a molar concentration. Because of that, you cannot convert an LDH value to mmol/L or place it on a lactate curve.
Why an LDH test is done and what happens at the draw
According to the test summaries that rank for this query, an LDH test measures the level of LDH in your blood or another body fluid to check for tissue damage. Clinicians often order it as part of a broader panel and rarely on its own. If you want to know why yours was ordered, the ordering clinician can answer that. The number on the report cannot.
What happens during the draw
The test uses a standard venous blood draw, and a lab analyser measures the sample. Follow the instructions you were given about preparation. If you got none, ask the practice or lab whether fasting, medication timing or recent exercise matters for your draw. Don't assume the answer from another person's test.
How sample handling can change the result
Red blood cells contain LDH. If they break open in the tube (haemolysis), they can release enzyme into the sample and push the measured value up even though nothing changed in the body. Some lab reports flag haemolysed samples. If yours has that flag, or if the draw was difficult, tell the clinician when you discuss the result. A repeat draw is the usual way to separate a handling problem from a real change.
Is an LDH level of 500 high? It depends on whose range you use
An LDH value means nothing without the reference range printed next to it on the same report. The StatPearls chapter on LDH biochemistry (Farhana et al., 2023) gives a typical normal range of 140 to 280 U/L. The same chapter adds that clinical interpretation depends on the patient's signs and symptoms. Yet people also search for "LDH range 313โ618", which means some printed reports use a reference interval with roughly twice those limits.
Labs set their own intervals for their own analysers and methods. A number copied from one report and compared against a range from another source gives a misleading answer.
The position-in-range calculation
To see where a result sits on its own report, compute its position within the printed range:
Position (%) = (result โ lower limit) รท (upper limit โ lower limit) ร 100
Values from 0% to 100% fall inside the range. Values below 0% or above 100% fall outside it. Here is the formula applied to the same two numbers on both ranges:
| Result | On a 140โ280 U/L range | On a 313โ618 range |
|---|---|---|
| 500 | (500 โ 140) รท 140 = 257%, outside | (500 โ 313) รท 305 = 61%, inside |
| 260 | (260 โ 140) รท 140 = 86%, inside | (260 โ 313) รท 305 = โ17%, below |
The same value of 500 is about 1.8 times the upper limit on the first range and comfortably mid-range on the second. A value of 260 flips the other way. The upper limits differ by a factor of about 2.2 (618 รท 280). That gap is far larger than any day-to-day fluctuation, so a range mismatch can produce false alarm or false reassurance on its own.
The decision rule is simple: only compare an LDH result with the range printed on the same report. When you track results over time, check that they come from the same lab before you read a trend into them.
Why "LDH normal range female" has no single answer
Some labs report one interval for all adults. Others split by age or sex, and children's intervals are often different. The answer to "what is normal for me" is the interval your lab printed for your demographic group. If the report shows no range, ask the lab for it. Don't borrow one from a website, including this one.
Does high LDH mean cancer?
Not by itself. A laboratory test overview for serum LDH states that lactate dehydrogenase elevations in patients with cancer are too erratic to be of use in the diagnosis of cancer. Because LDH is present in nearly all cells, a raised total can come from many sources. Searches for "what cancers cause high LDH" or "what autoimmune disease causes high LDH" turn the logic upside down. The number does not point to a condition. A clinician reads it alongside history, examination and other tests.
If a result worries you, write down three questions before the follow-up appointment: Is this outside this lab's range, and by how much? Was the sample flagged as haemolysed? Does it need repeating, and when?
Can you reduce an LDH level?
LDH is a marker, not a treatment target. Trying to "lower the number" without knowing why it rose treats the reading and ignores whatever caused it. Any decision about follow-up, repeat testing or treatment belongs to the clinician who ordered the test. This article does not give guidance on changing it.
What endurance athletes should record before an LDH draw this winter
December and January are when many athletes book both annual blood work and a base-season step test. In that window, the venous LDH draw and the fingertip lactate samples can end up in the same week. The two don't interfere with each other on paper. But the clinician reading your LDH result can only weigh what happened before the draw if you tell them. Whether a hard session matters for your specific draw is their call. Your job is to log it.
The eight-field pre-draw log
- Date and clock time of the draw
- Lab name, plus the reference range printed on the report
- Last hard session: type, duration and how many hours before the draw
- Any step test or lactate test in the previous days
- Whether the sample was flagged as haemolysed or the draw was difficult
- Illness, injury or unusual soreness that week
- Medications and supplements, as you would list them for any appointment
- Previous LDH results, with the lab named for each
A fictional example
A fictional cyclist does a ramp step test on a Tuesday in early January and has routine blood work on Thursday morning. Their log shows the step test 44 hours before the draw, the lab name, and a printed range of 313โ618. The result is 500. The position formula puts that at 61% of their own lab's range. Last year's result came from a different practice with a 140โ280 range, so the two values can't be compared directly. They take the log to the appointment and leave the reading of it to the clinician.
Step-test lactate values are a separate question with a separate tool. If what you actually want is LT1, LT2 or training zones, use the capillary lactate readings from your step test, not your LDH value. There is more on how the lab enzyme and blood lactate get confused in LD Blood Work: What an LDH Test Measures (Not Lactate).
FAQ
Is lactic dehydrogenase the same as lactate dehydrogenase?
Yes. "Lactic dehydrogenase", "lactic acid dehydrogenase", "lactate dehydrogenase", LDH and LD all name the same enzyme. Lab reports and test catalogues use these labels interchangeably.
Can my LDH result tell me my lactate threshold?
No. LDH is enzyme activity measured in U/L from a single resting draw. Lactate threshold comes from blood lactate concentrations in mmol/L measured across graded exercise stages, and no formula links the two.
Why do two labs give different normal ranges for LDH?
Labs set their own reference intervals for their own methods and analysers, so a 140โ280 U/L range and a 313โ618 range can both be correct for the lab that printed them. Compare each result only with the range on its own report.
What should I ask if my LDH comes back outside the range?
Ask how far outside this lab's range it is, whether the sample was haemolysed, and whether and when it should be repeated. Interpreting the result and deciding what follows is up to the clinician who ordered the test.